PRODUCT 600-T RUBBERIZED STUCCO

Description

DESCRIPTION. PRODUCT NO. 600-T creates a thick rubber-like shield of protection which is highly resistant to cracking or chipping. This rubberized stucco product also contains bonding agents which give it excellent adhesion and ceramics for insulating properties.

USES. This rubberized stucco product is excellent for use as a complete interior or exterior wall finish, as well as for repairing existing walls. It is paintable, or you may also have it pre-tinted to a color of your choice to eliminate expensive repainting. PRODUCT NO. 600-T can be applied in various types of finishes and is ideal for beautifying virtually any surface, such as existing stucco, masonry, block, brick, metal, plywood, OSB, or wood siding.

SURFACE PREPARATION. All surfaces must be dry and free of dust, oil, loose granules, or peeling paint and all other foreign matter. You can use wire brushing, sanding, or power washing in order to prepare the surface. All cracks, joints, or uneven surfaces should be filled with PRODUCT NO. 501-W-P Patching Compound or PRODUCT NO. 400 Smooth Base Coat can be applied prior to applying PRODUCT NO. 600-T for filling hairline cracks, waterproofing, and providing additional insulation.

APPLICATION. Power mix product to an even mixture, then apply to surface with a stiff brush, roller, trowel, or hopper gun depending on the desired surface. Keep the brush or roller moist for easy application. If you want a thinner texture, then reduce viscosity with PRODUCT NO. 290 Surface Bonder. Apply PRODUCT NO. 600-T at a rate of 5-8 gallons per 100 sq. ft., depending on the desired thickness and finish. This product should not be applied when rain or frost is forecasted within 24 hours. Apply only when the temperature is 55 degrees and rising.

KEEP PRODUCT FROM FREEZING

CLEAN-UP. Clean brushes, tools, and other equipment with soapy water immediately after use.